Filter
Top Products
Periodic maintenance and adjustment
66
WARNING
EWS00511
Do not grease the throttle cable because it
could become frozen, which could cause
loss of control. Apply a dab of grease onto
the cable end only.
FX10RTRS
FX10XT
ESU12852
Replacing a headlight bulb
1. Remove the shroud. (See page 44 for re-
moval procedures.)
2. Disconnect the headlight coupler.
3. Remove the bulb holder cover.
Lubricants:
Brake lever:
Silicone grease
Other lubrication points:
Low-temperature grease
1. Lubrication point
1. Throttle cable end
1
1. Lubrication point
1. Lubrication point
1. Headlight coupler
2. Bulb holder cover
1
1 1
U8HK10E0.book Page 66 Tuesday, June 10, 2008 1:58 PM