Filter
Top Products
Control functions
26
ESU13440
Adjusting the damping forces of the
center and rear shock absorbers
(FX10RTRS), or damping force of the
rear shock absorber (FX10XT)
NOTICE
ECS00881
● Do not continue to turn the adjuster in
direction (a) after it stops. The shock ab-
sorber could be damaged and damping
force adjustments will not be able to be
made.
● Do not turn the adjuster in direction (b)
beyond the adjustable range. Even if the
adjuster is continually turned beyond
the adjustable range, there will be no
change in the damping force.
FX10RTRS
The compression and rebound damping forc-
es can be adjusted by turning the adjusting
bolt, dial, knob, or screw.
Center shock absorber
To increase the compression damping force,
turn the adjusting screw in direction (a). To
decrease the compression damping force,
turn the adjusting screw in direction (b).
To increase the rebound damping force, turn
the adjusting dial in direction (a). To decrease
the rebound damping force, turn the adjusting
dial in direction (b).
1. Compression damping force adjusting
screw
1
(b) (a)
Compression damping force setting:
Minimum (soft):
12 click(s) in direction (b)*
Standard:
6 click(s) in direction (b)*
Maximum (hard):
2 click(s) in direction (b)*
* With the adjusting screw fully turned in
direction (a)
1. Rebound damping force adjusting dial
Rebound damping force setting:
Minimum (soft):
20 click(s) in direction (b)*
Standard:
11 click(s) in direction (b)*
Maximum (hard):
3 click(s) in direction (b)*
* With the adjusting dial fully turned in di-
rection (a)
U8HK10E0.book Page 26 Tuesday, June 10, 2008 1:58 PM