Filter
Top Products
PERIODIC MAINTENANCE AND ADJUSTMENT
7-35
7
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the turn signal light unit by
installing the screw. NOTICE: Do
not overtighten the screw, oth-
erwise the lens may break.
[ECA11191]
EAU24313
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
2. Remove the license plate light bulb
socket (together with the bulb) by
pulling it out.
1. Turn signal light bulb socket
1. Turn signal light bulb
1. License plate light unit
2. Screw
U1CA10E0.book Page 35 Tuesday, November 24, 2009 1:41 PM