Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
4-15
4
EAU39322
Seats
Passenger seat
To remove the passenger seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
2. Pull the passenger seat forward,
and then lift it up.
To install the passenger seat
1. Place the passenger seat in the
original position, and then push the
rear of the seat down to lock it in
place.
2. Remove the key.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Push the rider seat lock lever, lo-
cated under the back of the rider
seat, to the right as shown, and
then pull the seat off.
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then push the rear
of the seat down to lock it in place.
2. Install the passenger seat.
1. Passenger seat lock
2. Unlock.
1. Rider seat lock lever
1. Projection
2. Seat holder
U1CA10E0.book Page 15 Tuesday, November 24, 2009 1:41 PM