Filter
Top Products
PERIODIC MAINTENANCE AND ADJUSTMENT
7-34
7
3. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
4. Install the headlight bulb cover,
and then connect the coupler.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU24114
Replacing the tail/brake light
bulb
1. Remove the passenger seat. (See
page 4-15.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
3. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the passenger seat.
EAU43002
Replacing a turn signal light
bulb
1. Remove the turn signal light unit
by removing the screw.
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1. Headlight bulb holder
1. Tail/brake light bulb socket
1. Turn signal light unit
2. Screw
U1CA10E0.book Page 34 Tuesday, November 24, 2009 1:41 PM