Filter
Top Products
PERIODIC MAINTENANCE AND ADJUSTMENT
7-37
7
1. Remove cowlings A and C. (See
page 7-9.)
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the cowlings.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU47400
Replacing the tail/brake light
bulb
1. Remove the passenger seat. (See
page 4-13.)
2. Remove the owner’s tool kit.
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
4. Remove the burnt-out bulb by pull-
ing it out.
1. Do not touch the glass part of the bulb.
1. Headlight bulb cover
2. Headlight coupler
1
2
1. Headlight bulb holder
2. Headlight bulb
1
2
1. Tail/brake light bulb socket
1
U36P11E0.book Page 37 Tuesday, September 29, 2009 5:12 PM