Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
4-14
4
To install the passenger seat
1. Insert the projection on the rear of
the passenger seat into the seat
holder as shown, and then push
the front of the seat down to lock it
in place.
2. Remove the key.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the bolts, and then pull
the rider seat off.
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, place the seat in the
original position, and then tighten
the bolts.
2. Install the passenger seat.
TIP
● Make sure that the seats are prop-
erly secured before riding.
● The rider seat height can be ad-
justed to change the riding posi-
tion. (See page 4-15.)
1. Projection
2. Seat holder
1
2
1. Rider seat
2. Bolt
1
2
1. Seat holder
2. Projection
1
2
U36P11E0.book Page 14 Tuesday, September 29, 2009 5:12 PM