Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
4-16
4
6. Install the passenger seat.
To change the rider seat height to
the low position
1. Remove the passenger and rider
seats. (See page 4-13.)
2. Remove the rider seat height posi-
tion adjuster by removing the ad-
juster bolts.
3. Install the rider seat height position
adjuster so that its bolt holes
marked “L” are aligned with the
bolt holes of the adjuster brackets,
and then install the adjuster bolts.
4. Insert the projection on the front of
the rider seat into seat holder A as
shown.
5. Align the upper bolt holes in the
rider seat with the bolt holes in the
seat brackets, and then install the
bolts.
6. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
1. Bolt
1
1. Rider seat height position adjuster
2. “L” mark
3. Adjuster bracket
1. Projection
2. Seat holder A (for low position)
1
3
2
2
1
1. Bolt
1
U36P11E0.book Page 16 Tuesday, September 29, 2009 5:12 PM