Yamaha 36P-28199-11 Offroad Vehicle User Manual


 
INSTRUMENT AND CONTROL FUNCTIONS
4-2
4
To unlock the steering
Push the key in, and then turn it to
OFF while still pushing it.
EAU11004
Indicator and warning lights
EAU11020
Turn signal indicator light “”
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
EAU11060
Neutral indicator light “”
This indicator light comes on when the
transmission is in the neutral position.
EAU11080
High beam indicator light “”
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU11254
Oil level warning light “”
This warning light comes on if the en-
gine oil level is low.
The electrical circuit of the warning light
can be checked by turning the key to
ON. The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to ON,
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
TIP
Even if the oil level is sufficient, the
warning light may flicker when
riding on a slope or during sudden
acceleration or deceleration, but
this is not a malfunction.
This model is also equipped with a
self-diagnosis device for the oil
level detection circuit. If a problem
is detected in the oil level detection
1. Push.
2. Turn.
1. Turn signal indicator light “”
2. Neutral indicator light “”
3. High beam indicator light “”
4. Engine trouble warning light “”
5. Oil level warning light “”
6. Coolant temperature warning light “”
1 234
65
U36P11E0.book Page 2 Tuesday, September 29, 2009 5:12 PM