Filter
Top Products
Specifications
A–2
Physical specifications
Physical specifications
Enclosure Sealed; dust and water-resistant
Dimensions Approximately. 8.5" (21.8 cm)H x 7”
(17.7 cm)W x 13.0"(33.0 cm)D, excluding DC
ground connector (similar to Group 31 battery
dimensions)
Net weight 30 lbs. maximum without mounting brackets or
external cables
External finish Base - Clear anodized aluminium.
Cover -Black polycarbonate/ABS plastic
Mounting Orientation Upright only
Mounting method Four M8x1.25 threaded holes accessible from
bottom only, one in each corner, and /or battery
hold-down bar over center top of cover.
Recommended torque: 5-6 ft-lb (7-8 Nm)
Battery cable #2/0 AWG Minimum, maximum 6 feet long,
each way
Battery size 300 Ah acceptable; 400 Ah recommended