Filter
Top Products
Maintenance
3–6
Removing and reconnecting AC cables
To remove the AC cables:
➣ Grasp the knurled surface of the connector housing as shown in
Figure 3-3 and turn counter clockwise approximately one-half turn.
Gently pull the cable out by grasping the connector.
To reconnect:
➢ Insert the plug firmly. Turn the connector housing clockwise 1/2 turn
until you feel resistance, then another
1/8 turn until it locks into place.
Figure 3-3 AC input and output cables
Power to vehicle
Turn these counterclockwise
to remove
Shorepower