Filter
Top Products
Using the toggle switch
2–9
Using the toggle switch
Location The inverter/charger is controlled from the remote toggle switch on the
control panel in the cabin as shown in Figure 2-3.
Figure 2-3 Remote switch
Switch
settings
The switch is used to disable the inverter. The charger is always on as long
as shorepower is connected.
Toggle switch
If the switch is … The inverter is …
On Providing AC to the vehicle when there is no
shorepower and the battery voltage is acceptable.
Off Providing pass-through AC to the vehicle only if
there is shorepower. The inverter is disabled and
will not provide AC power in the absence of
shorepower.