Filter
Top Products
OPERATION
7
OPERATION
6
CRUISADER’s Display
The LCD display shows the detected signals as well as
battery voltage, air temperature, Aux out selection (LED,
Tone or Voice Module) and volume level selected.
See example:
NOTE: The features listed above can be programmed
ON or OFF in option select mode. If one or more are
programmed OFF, that area will be blank. See example
of all programmed OFF Below:
Currently the laser/radar information is centered in the
display, but these can be programmed in option select
mode to have either the battery voltage or air tempera-
ture displayed center stage. See examples on page 7:
Ice Warning Mode: When temperature drops to 32˚F
display shows:
Unit then gives a unique warning tone and the backlight
will flash. This will only happen once after the unit is first
turned on. When either Hi T or Lo T is displayed, the
limits of the temperature sensor have been reached.
Note: Temperature may rise while vehicle is stopped and
idling, this is normal.
Battery Voltage
Temperature
AUX Out Feature
Volume Level
Highway
Temperature
Battery Voltage