Filter
Top Products
178
Maintenance and service
Replacing bulbs
To fit:
– Fit the new bulb. In can only be
positioned one way.
– Plug in the connector.
– Put the lamp back in place and turn it so
that the connector faces down.
– Refit the cover.
Position and parking lamp bulb
Position/parking lamps
To remove the bulb:
– Switch off all lights and turn the ignition
key to position 0.
– Remove the cover (same cover as for
dipped beam).
– Pull out the lamp.
– Unplug the connector.
To fit:
– Fit the new bulb.
– Plug in the connector.
– Refit the cover.
Direction indicator bulb, left-hand side
Direction indicator, left-hand
side
To remove the bulb:
– Switch off all lights and turn the ignition
key to position 0.
– Twist the bulb holder anticlockwise and
remove it.
– Press the bulb inwards, turn it
anticlockwise and remove it from the bulb
holder.
To fit:
– Fit the new bulb by pressing in and
turning clockwise.
– Refit the bulb holder in the lamp housing
and turn it clockwise.