Filter
Top Products
2000 Volvo S & V70
Loosen wheel bolts
Changing a wheel
The spare wheel is located under the carpet on the trunk floor. The jack and crank are secured in the
wheel recess.
· Engage the parking brake.
· Put the gear selector in (P)ark (automatic) or in Reverse (manual).
· Remove the wheel cap (where applicable) using the lug wrench in the tool kit.
· With the car still on the ground, use the lug wrench to loosen the wheel bolts 1/2 1 turn. Turn the bolts
counterclocKWise to loosen.
Insert flat end of lug wrench and turn/
Pull straight out
· Fold out the crank handle on the jack by pressing the knob on the handle downward. To attach the jack,
refer to the illustration on the following page.
NOTE: To avoid excessive wear and the necessity of rebalancing, mark and reinstall wheels in the same
location and position as before removal. To lessen the chance of imbalance, each wheel hub is equipped
with a guide stud to ensure that a removed wheel can be reinstalled in its original position (as when
changing over to winter tires/wheels).
file:///K|/ownersdocs/2000/2000_SV70/00sv70_06.htm (2 of 22)12/30/2006 3:43:46 PM