Filter
Top Products
9
3. Install the camera unit to the mounting bracket using the supplied insulating spacers and Bracket mounting
bolts (with washer, stainless steel).
Note
Be sure to position the insulating spacers between the bracket and bolt, as induction voltage or noise may be
produced at the joints depending on installation conditions.
Also, do not remove the insulating washers attached to the mounting bracket.
Mounting bracket
Bracket mounting bolts
(with washer, stainless steel)
Insulating spacer
The insulating washers are attached
to the mounting bracket.
2. Install an anchor nut into a ceiling or a wall, then secure the mounting bracket.
Anchor nut
M8 or W3/8
Plain washer
Camera mounting bolt
M8 or W3/8
Spring washer
Mounting bracket
Ceiling
Anchor nut
M8 or W3/8
Plain washer
Camera mounting bolt
M8 or W3/8
Spring washer
Mounting bracket
Ceiling
Anti-rotation screw
(tapping screw)