Filter
Top Products
14
Sunshade fixing screw
(Screw with captive
washer M3x8)
Slot to insert the sunshade
fixing screw
Sunshade
Sunshade fixing screw
After inserting the sunshade, turn clockwise to fix it in position (as shown),
then secure it with the sunshade fixing screws.
[Ceiling mounting example]
7. After completing all the adjustments, disconnect the cable connected to the monitor output terminal in Step 2.
8. Tighten both the camera mounting and bracket mounting bolts, then replace the front cover.
Note: If the front cover is not secured enough, waterproof effect is reduced, causing unit failure.
9. Insert the sunshade from the front side of the camera unit as shown below, then secure it with two
sunshade fixing screws.