Filter
Top Products
Page 65
I Have a Question
How can I keep the device still?
If the whole mount shifts out of position, the suction cup
probably isn’t getting a good grip on the windshield. Try
removing the mount from the windshield and re-installing
it. See page 19 for hints on getting the suction cup to stick
better.
If the device shifts out of position even though the suction
cup itself stays in place, try tightening the bracket joint.
TiGhTeninG The BRAckeT joinT
Remove the mount from your windshield.
Lift the adjustment lock, and twist the lock handle
clockwise two, maybe three turns.
Flip the adjustment lock back down and see if the bracket
still moves. If it does, repeat step 2.
If the adjustment lock won’t go back down, the bracket
joint is too tight. Twist the adjustment lock one or two
turns counter-clockwise and try to ip it down again.
1)
2)
3)
4)
Lift the
adjustment
lock.
Twist the
adjustment
lock clockwise
a few turns to
tighten the
bracket joint.
1
2
Lift the
adjustment
lock.
Twist the
adjustment
lock clockwise
a few turns to
tighten the
bracket joint.
1
2