Filter
Top Products
Page 42
What Else Can I Do with Routes?
Find the location you want to set as a waypoint. Follow
the same steps you normally use to set a destination until
you get to the Conrm Destination screen.
On the Conrm
Destination screen, tap
the options button. The
Options screen now has
one more button available:
the set as waypoint
button.
Tap the set as
waypoint button.
The device goes to
the Waypoint
screen, which shows
the waypoint along
with your destination.
If you want to add
more waypoints, go
back to the main
Menu screen and enter the next destination. (When
you leave the Waypoint screen, the device saves your
waypoints until you delete the route.)
When you are nished adding waypoints, tap the
recalculate button.
The device re-plots the route, starting from your current
location and going to the waypoint. Then it plots the route
from the waypoint to the nal destination.
Until you tap the recalculate button, the device
will use the route as originally plotted, without any
waypoints.
4)
5)
6)
7)
8)