Filter
Top Products
LED SIGNAL STRENGTH METER IN CITY MODE
The LED signal strength meter gives you instant information
about the strength of the signal being detected. A weak signal
causes the first LED to light, but as signal strength increases,
more LEDs light. All three LEDs light when full signal strength is
received. Use this meter to judge the distance from the
signal source.
Signal Strength X-, K-, and
Ka-Super
WideBand
Laser
●❍❍ Visual Visual/Audio
●●❍ Visual/Audio Visual/Audio
●●● Visual/Audio Visual/Audio
SAFETY WARNING SYSTEM OPERATION
The Safety Warning System (SWS) is a new communication
system that will provide an early warning when a road hazard
exists. The LRD 6250SWS/LRD 6275SWS is capable of detecting
the SWS signal broadcast on the K-band by either law
enforcement or local departments of transportation. The green
SWS LED blinks while an audible alert sounds. When this alert
sounds, you should tune to local radio traffic reports or prepare to
slow down or stop your vehicle because you could be approaching
an accident, bad road conditions caused by weather, or road
crews or construction.
17
OPERATION
C:...LRD6250-75SWS-.vp
Thu Jan 14 09:28:21 1999
Color profile: Disabled
Composite Default screen