TomTom 4CQ02 GPS Receiver User Manual


 
Settings12.
37
Set-
tings
About settings
You can change the way your TomTom GO looks and behaves. Most of the settings on
your device can be accessed by tapping Settings in the Main Menu.
Use night colours / Use day colours
Turn off voice guidance / Turn on voice guidance
Use night
colours
Tap this button to reduce the brightness of the screen and display the
map in darker colours.
When driving at night or when driving through a dark tunnel, it is easier
to view the screen and less distracting for the driver, if the brightness of
the screen is dimmed.
Tip: Your GO has a light sensor to monitor changes to the available
light in your car, such as when driving in and out of a tunnel. To auto-
matically switch between night and day colours, tap Brightness set-
tings in the Settings menu and select Switch to night colours when
dark.
Use day
colours
Tap this button to increase the brightness of the screen and display the
map in brighter colours.
Turn off Voice
guidance
Tap this button to switch off voice guidance. You will no longer hear
spoken route instructions, but you will still hear information such as,
traffic information and warnings.
Voice guidance is also switched off if you tap Turn off sound in the Set-
tings menu.
Note: If you change the voice on your GO, then voice guidance is auto-
matically switched on for the new voice.
Turn on Voice
guidance
Tap this button to switch on voice guidance and hear spoken route
instructions.