Filter
Top Products
Page 18
INSTALLATION MANUAL
REMOTE VEHICLE STARTER
Menu 3- Starter Settings - Continued From Previous Page
Setting 5 Maximum Crank Time
1) 10 Seconds 1 Flash/Honk 10 sec max time that the starter will stay engaged.
2) 3 Seconds 2 Flashes/Honks 3 sec max time that the starter will stay engaged.
*3) 5 Seconds 3 Flashes/Honks 5 sec max time that the starter will stay engaged.
Press & Release the Program Button 5 Times (Setting 5) Confirmed with 5 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 6 Anti-Grind/Starter Kill (Auxiliary Connector Pin 4)
1) Active 1 Flash/Honk (-) when locked and during remote start (Anti-Grind).
2) Passive 2 Flashes/Honks (-) when locked /30 seconds after ignition is Off or unlock is pressed
*3) Anti-grind 3 Flashes/Honks Output during remote start only. (Anti-grind/ Bypass module)
Press & Release the Program Button 6 Times (Setting 6) Confirmed with 6 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
Setting 7 Safety Start
1) Safety On 1 Flash/Honk Press the start button twice within 3seconds to remote start vehicle.
*2) Safety Off 2 Flashes/Honks Press the start button once to remote start vehicle.
Press & Release the Program Button 7 Times (Setting 7) Confirmed with 4 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.