Sennheiser SR350 IEM Automobile Accessories User Manual


 
39
SR 300 IEM G2 transmitter/SR 350 IEM G2 twin transmitter
Type approvals
Connector assignment
RF characteristics SR 300 IEM G2 SR 350 IEM G2
RF output power at 50 Ω 20 mW 100 mW, switchable to 15 mW
ERP depending on
antenna type used
depending on
antenna type used
Antenna output BNC socket, 50 Ω BNC socket, 50 Ω
AF characteristics
Headphone output ¼’’ (6.3 mm) stereo jack socket
Output power at headphone output 100 mW an 32 Ω (2x)
AF input 2 x XLR-3 socket, electronically balanced
Max. input voltage (peak deviation, 1 kHz) +20 dB
u
Input impedance 10 kΩ
Overall device
SR 300 IEM G2 SR 350 IEM G2
Power supply 10,5–16 V DC 100–240 V AC/50–60 Hz
Nominal voltage 12 V DC
Power consumption at nominal voltage approx. 300 mA approx. 400 mA
Dimensions [mm] 212 x 145 x 38 436 x 215 x 43
Weight approx. 1100 g approx. 3960 g
Area Conformity
SR 300 IEM G2 SR 350 IEM G2
USA: FCC-Part 74.861 FCC-Part 74.861
FCC ID: DMOF2EUVL FCC ID: DMOSR350
Canada: RSS-123 RSS-123
IC: 2099A - G2SREK IC: 2099A-SR350
EU:
complies with the requirements for Radio and
Telecommunications Terminal Equipment (R&TTE):
y EN 300422-1/-2, class II
y EN 301489-1/-9
complies with the requirements for Radio and
Telecommunications Terminal Equipment (R&TTE):
y EN 300422-1/-2, class II
y EN 300454-1/-2
y EN 301489-1/-9
complies with the requirements for safety (LVD):
y EN 60065
complies with the requirements for safety (LVD):
y EN 60065
SR 300/350 IEM G2:
¼’’ (6.3 mm) stereo jack plug
for headphone output
SR 300/350 IEM G2:
XLR-3M connector
SR 300:
DC connector for power
supply
EK 300 IEM G2:
3.5 mm stereo jack plug
for headphone output
0682
0682
21
3
+
ew300_350_IEM_INT.book Seite 39 Freitag, 7. März 2008 8:55 08