Sennheiser SR350 IEM Automobile Accessories User Manual


 
21
Overview of menus
Working with the operating menu
By way of example of the “Tune” menu, this section describes how to use the
operating menu.
After switching the unit on, the standard display is shown on the display
panel.
Transmitter Receiver
Display Function of the menu Display Function of the menu
Bank Switching between channel banks BANK Switching between channel banks
Channel Switching between the channels in
a channel bank
CHAN Switching between the channels in
a channel bank
Tune Setting a transmission frequency for the
channel bank “U” (user bank)
TUNE Setting a receiving frequency for the
channel bank “U” (user bank)
⎯⎯ SCAN Scanning a channel bank for free
channels
⎯⎯ SQELCH Adjusting the squelch threshold
⎯⎯ ST-FOC Stereo/FOCUS selection
⎯⎯ LTD Limiting the volume at the
headphone output
⎯⎯ Hi-BST Activating/deactivating
the frequency boost
Sensitiv Adjusting the sensitivity ⎯⎯
Display Selecting the standard display DISPLY Selecting the standard display
Name Entering a name NAME Entering a name
Reset Loading the factory-preset
default settings
RESET Loading the factory-preset
default settings
PILOT Activating/deactivating
the pilot tone evaluation
LCD Contr Adjusting the contrast of the
graphic display
⎯⎯
Mode Stereo/mono selection ⎯⎯
Lock Activating/deactivating the lock mode LOCK Activating/deactivating the lock mode
Exit Exiting the operating menu and
returning to the standard display
EXIT Exiting the operating menu and
returning to the standard display
SR 300 IEM G2/SR 350 IEM G2
EK 300 IEM G2
ew300_350_IEM_INT.book Seite 21 Freitag, 7. März 2008 8:55 08