Sennheiser SR350 IEM Automobile Accessories User Manual


 
22
Getting into the operating menu
̈ Press the SET button to get from the standard display into the operating
menu.
The last menu selected flashes on the display. With the transmitter, the
current setting is additionally displayed.
Selecting a menu
̈ Press the ̄/̆ rocker button to select a menu.
̈ Press the SET button to get into the setting mode of the selected menu.
With the receiver, the current setting that can be adjusted flashes on the
display. With the transmitter, the name of the menu and the current
setting are displayed.
Adjusting a setting
̈ Press the ̄/̆ rocker button to adjust the setting.
By briefly pressing the ̄/̆ rocker button, the display jumps either
forwards or backwards to the next setting. In the “Channel”, “Tune” and
Name” menu, the ̄/̆ rocker button features a “fast search” function.
If you hold down a button, the display cycles continuously. The “fast
search” function allows you to get fast and easily to your desired setting.
With the receiver, the new setting flashes on the display until it is stored.
Storing a setting
̈ Press the SET button to store the setting. “Stored” appears on the display,
indicating that the setting has been stored. The display then returns to
the top menu level.
With most menus, new settings become effective immediately without
having to be stored. An exception are the “Bank”, “Channel”, “Tune” and
Reset” menus of the transmitter and the “RESET” menu of the receiver.
With these menus, new settings only become effective after they have
been stored (“Stored” appears on the display, indicating that the setting
has been stored).
Exiting the operating menu
̈ Select the “Exit” menu to exit the operating menu and to return to the
standard display.
When you have entered the operating menu, the transmitter’s ON button
serves as the ESC (cancel) key, i.e. by briefly pressing this button, you
cancel your entry and return to the standard display. The receiver has a
separate ESC button with which you can cancel your entry.
ew300_350_IEM_INT.book Seite 22 Freitag, 7. März 2008 8:55 08