Filter
Top Products
Precision - Page 23
5. Ignition Door Unlocking. Selects whether or not the system automatically unlocks the doors when
the ignition is turned off. The Ignition Door Locking feature may be programmed to unlock all doors or
the driver’s door only. If driver’s door only is selected, the optional Passenger Unlock wire must be
connected. (
See Two Stage Door Lock Diagrams
)
6. Door Unlock Pulse. Selects between one pulse or two pulse operation for the door unlock output.
Many new import vehicles’ factory door locking systems require two pulses on the proper wire to unlock
the doors. These systems can be interfaced directly without the use of relays or any additional circuitry
by programming the system for double unlock pulse.
7. Door Lock Pulse Length. Selects between a 1, 3 or 0.1 seconds output for door locking and
unlocking. Program to 3 seconds for vehicles equipped with vacuum door locking systems.
8. Passive Door Locking. Selects whether or not the system will automatically lock the doors during
Passive Arming.
9. Remote Start Confirmation Chirps. When enabled, system chirps before starter is activated. When
disabled, no chirps will sound upon start.
Branch Feature Button 1 (default) Button 2 Button 3
1. Arm Mode Manual Arming Passive Arming
2. Auto Rearming Mode Disabled Enabled
3. Arming Chirps Siren Chirps On Siren & Horn Chirps On Silent
4. Ignition Door Locking On Off Set Override Code
5. Ignition Door Unlocking Unlock All Unlock Driver Only Off
6. Door Unlock Pulse Single Double
7. Door Lock Pulse Length 1 second 3 seconds 0.1 seconds
8. Passive Door Locking Disabled Enabled
9. Start Confirmation Chirps Disabled Enabled
10. Ignore Open Door Report Off Ignore
11. Aux 2 Activate on Arm Off On
12. Aux 2 Mode Pulsed Timed Latched
13. Disarm with Aux 1 Disabled Enabled
14. Aux 3 Output Mode Aux 3 Output Factory Rearm Output
15. Start in Valet Mode Disabled Enabled
16. Lock after Start On Off
17. Lock after Shutdown On Off
18. Engine Run Time 15 minutes 25 minutes
19. Automatic Start Mode 2 hours 1 hours
20. Engine Sense Mode Tachless
21. Remote Start Program RPM Learn/Tach Monitor Gas Engine Diesel Engine
22. Ignition 2 Output Program Ignition 2 Output Accessory 2 Output Starter 2 Output
23. Horn Honk Output Horn Output Ignition 3 Output
24. Turbo Timer Disabled Enabled
25. Extended Parking Lights On Off
26. Warn-Away Report Enabled Disabled
Programming
Branch
Table
for
5200-55500