Filter
Top Products
Manual Operation
The air delivery mode or fan speed, can manually be
adjusted.
9 (Off): Turns the fan off. Outside air still enters the
vehicle. The direction can be changed by changing
the mode position. The temperature can also be
adjusted using either the up or down arrow temperature
buttons.
9 (Fan Control): Turn to increase or decrease the
fan speed.
wxTemperature Control: Press to increase or
decrease the temperature inside the vehicle.
Air Delivery Mode Control: Turn clockwise or
counterclockwise to change the direction of the airflow.
To change the current mode, select one of the
following:
H (Vent): Air is directed to the instrument panel outlets.
) (Bi-Level): Air is divided between the instrument
panel outlets and the floor outlets, with some air directed
to the side window defogger.
6 (Floor): Air is directed to the floor outlets, with
some air directed to the side window outlets.
The right knob can also be used to select defog or
defrost modes. Information on defogging and defrosting
can be found later in this section.
- (Defog): This mode clears the windows of fog or
moisture. Air is directed to the floor and windshield
outlets.
0 (Defrost): This mode clears the windshield of fog or
frost more quickly. The system automatically controls
the fan speed if defrost is selected from the AUTO
mode. If the outside temperature is 40°F (4°C) or
warmer, the air conditioning compressor automatically
runs to help dehumidify the air and dry the windshield.
The air conditioning indicator light blinks three times
if the compressor is turned off while in this mode.
The engine will not perform Auto Stops when the defrost
mode is on.
# (Normal Air Conditioning): Press to turn the air
conditioning on and off. A light above the button comes
on to show that it is on.
When air conditioning is selected or is in AUTO mode,
the system runs the air conditioning automatically to
cool and dehumidify the air entering the vehicle.
3-21