Filter
Top Products
{ CAUTION:
Overinflation could cause the tire to rupture,
and you or others could be injured. Be sure to
read the inflator instructions, and inflate the
tire to its recommended pressure. Do not
exceed 35 psi (248 kPa).
8. Turn the selector switch (A) clockwise to the air
only position.
The tire sealant and compressor kit will inflate the
tire with air only.
9. Push the On/Off button (B).
10. Inflate the tire to the recommended inflation
pressure using the air pressure gage (E) on the
top of the unit. See Inflation - Tire Pressure on
page 5-56.
The pressure gage reading is slightly high while the
compressor is on. Turn the compressor off to get
an accurate pressure reading. The compressor may
be turned on and off until the correct pressure is
reached.
11. Turn off the air compressor by pushing the On/Off
button (B).
Be careful while handling the tire sealant and
compressor kit as they could be hot after usage.
12. Unplug the air compressor accessory plug and
wrap it back into place.
5-82