+/− (Increase/Decrease Temperature): These buttons
select the temperature of the air flowing into the rear
passenger area. Press the + button for warmer air and
press the − button for cooler air. The temperature settings
will display in 0-12 increments, going from the coolest (0)
to the warmest (12) setting.
N (Mode): Press the mode button to manually change
the direction of the airflow in the vehicle. Repeatedly
press the button until the desired mode appears on the
display. Multiple presses cycles through the delivery
selections.
H (Vent): This mode directs air through the headliner
outlets.
) (Bi-Level): This mode directs air through the floor
outlets as well as the headliner outlets. The rear system
floor outlets are located under the third row seats.
6 (Floor): This mode directs air through the floor
outlets. The rear system floor outlets are located under
the third row seats.
Warning Lights, Gages, and
Indicators
This section describes the warning lights and gages on
the vehicle.
Warning lights and gages can signal that something is
wrong before it becomes serious enough to cause
an expensive repair or replacement. Paying attention to
the warning lights and gages could prevent injury.
Warning lights come on when there may be or is a
problem with one of the vehicle’s functions. Some
warning lights come on briefly when the engine is started
to indicate they are working.
Gages can indicate when there may be or is a problem
with one of the vehicle’s functions. Often gages and
warning lights work together to indicate a problem with
the vehicle.
When one of the warning lights comes on and stays on
while driving, or when one of the gages shows there
may be a problem, check the section that explains
what to do. Follow this manual’s advice. Waiting to do
repairs can be costly and even dangerous.
3-37