Filter
Top Products
#(Air Conditioning): Press this button to
turn the air conditioning system on or off. When
this button is pressed, an indicator light above
the button will come on to let you know the
air conditioning is activated. Air conditioning
can be selected in any mode as long as the
fan is on in any speed position.
On hot days, activate the air conditioning system,
select maximum fan speed and the coldest
temperature setting. Open the windows long
enough to let the hot inside air escape, then close
them. This helps reduce the time it takes for your
vehicle to cool down. It also helps the system to
operate more efficiently. Adjust fan speed and
temperature setting as required to achieve comfort.
The air conditioning system removes moisture
from the air, so you may sometimes notice a
small amount of water dripping underneath your
vehicle while idling or after turning off the
engine. This is normal.
Defogging and Defrosting
Fog on the inside of windows is a result of high
humidity (moisture) condensing on the cool window
glass. This can be minimized if the climate control
system is used properly. There are two modes to
clear fog or frost from your windshield and side
windows. Use the defog mode to clear the windows
of fog or moisture and warm the passengers. Use
the defrost mode to remove fog or frost from the
windshield more quickly. For best results, clear all
snow and ice from the windshield before defrosting.
Turn the right knob to select the defog or
defrost mode.
-(Defog): This mode directs air to the
windshield, side window outlets and floor outlets.
When you select this mode, the system will turn
recirculation mode off and run the air conditioning
compressor unless the outside air is at or below
freezing. Recirculation mode cannot be selected
while in defog mode. This helps prevent window
fogging and moisture building up within the cabin.
To defog the windows faster, turn the temperature
knob clockwise to the warmest setting.
157