Filter
Top Products
Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
• G Turn and Lane-Change Signals. See
Turn and Lane-Change Signals on page 143.
• O Exterior Lamp Control. See Headlamps on
page 149.
• 2 Headlamp High/Low-Beam Changer.
See Headlamp High/Low-Beam Changer
on page 144.
• Flash-to-Pass Feature. See Flash-to-Pass on
page 144.
• AUTO Automatic Headlamps. See Automatic
Headlamp System on page 151.
Turn and Lane-Change Signals
The turn signal has one upward (for right) and
one downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or
down. When the turn is finished, the lever will
return automatically.
An arrow on the
instrument panel
cluster will flash in the
direction of the turn
or lane change.
To signal a lane change, raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete the lane change. The lever will return
by itself when you release it.
As you signal a turn or a lane change, if the
arrows flash rapidly, a signal bulb may be burned
out and other drivers won’t see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows do not go on at all when you
signal a turn, check the fuse, see Fuses and Circuit
Breakers on page 409 and for burned-out bulbs.
143