Filter
Top Products
65Instruments and controls
Trip computer function of the SID
SID contains the following functions:
When the engine is started, the function that
was selected when the engine was
switched off is displayed, with the following
exceptions:
• Temp is displayed if the outside temper-
ature is between 26 and 38°F (–3 and
+3°C).
• D.T.E is displayed if less than or equal to
30 miles (50 km).
Outdoor temperature
The Temp function is always activated
(even in Night Panel mode) if the outdoor
temperature rises or falls to between 26 and
38°F (–3 and +3°C).
Climate System, page 93.
Rear Defroster
Heated Seats
Fan Settings
Air Distribution
A/C Mode
Dual/Single Zone
Default Settings
System Settings, page 70.
Language
Unit
Speed Scale Illum.
Service Info
WARNING
It is strongly recommended that the SID
settings be changed only when the car is
stationary. The driver’s attention can
otherwise easily be distracted from the
road.
Temp Outdoor temperature
D.T.E.
Estimated range (distance to
empty fuel tank)
Fuel Ø
Average fuel consumption
since function last reset
Date Date
Dist
Distance to destinations.
Function can also be used as
a trip meter
Arriv Estimated time of arrival
Speed Ø
Average speed since func-
tion last reset
Speed W Speed warning (chime)
WARNING
Remember that roads can be icy even at
temperatures of above 38°F (+3°C),
especially on bridges and stretches of
road that are sheltered from the sun.