Filter
Top Products
29
DYNAMIXEL
RX-64
Example 20 Lock all addresses except for Address 0x18 ~ Address0x23 for a Dynamixel
actuator with an ID of 0
Set Address 0x2F (Lock) to 1.
Instruction Packet
Instruction = WRITE_DATA, Address = 0x2F, DATA = 0x01
Communication
->[Dynamixel]:FF FF 00 04 03 2F 01 C8 (LEN:008)
<-[Dynamixel]:FF FF 00 02 00 FD (LEN:006)
Status Packet Result NO ERROR
Once locked, the onl y way to unlock it is to remove the power.
If an attempt is made to access any locked data, an error is returned.
->[Dynamixel]:FF FF 00 05 03 30 40 00 87 (LEN:009)
<-[Dynamixel]:FF FF 00 02 08 F5 (LEN:006)
Example 21 Set the minimum power (Punch) to 0x40 for a Dynamixel actuator with an ID of 0
Instruction Packet
Instruction = WRITE_DATA, Address = 0x30, DATA = 0x40, 0x00
Communication
->[Dynamixel]:FF FF 00 05 03 30 40 00 87 (LEN:009)
<-[Dynamixel]:FF FF 00 02 00 FD (LEN:006)
Status Packet Result NO ERROR
Range Error