Filter
Top Products
9.
STARTING
SYSTEM
9-1
RECOIL
STARTER
When repairing recoil starter, disassemble and reassemble in the following procedures.
Tools
:
Socket wrench, Needle nose pliers, Screw driver
[NOTE]
The following explanation
is
applicable to the recoil starter
for
“D”
type engines.
For
“B”
type models, reverse the direction
of
rotation
to
achieve proper service work.
9-1
-1
HOW
TO
DISASSEMBLE
(D
Type)
(1)
Remove recoil starter from engine.
(2)
Pull
starter
knob
and pull out starter rope
for
30-40cm to line
up
notch on reel with
outlet
hole
for
starter rope.
Hold
reel with thumb
and
pull
starter rope
inside the starter case with screw driver.
(See Fig.
69.)
Rewind reel clockwise until the rotation
stops.
When rewinding the reel, control the
rotation by holding starter rope using the
notch on the reel and pressing the reel with
thumb.
(3)
Remove parts in the
following
order.
1.
Center screw
2.
Friction plate
3.
Friction spring
4.
Ratchet
5.
Ratchet spring
TARTER
ROPE
I
Fig.
69
4,
Fig.
70
-
49
-