Filter
Top Products
GPS-6036 Operating Manual
Rikaline
Rikaline International Corp. 14F, 171, Chen-Gong Road, SanChong City, Taipei 241, Taiwan
Tel: ++886 2 8973 1899 Fax: ++886 2 8973 1896 E-Mail: info@rikaline.com.tw
Web: www.rikaline.com.tw
4
1. Introduction
1.1 Overview
The Rikaline GPS-6036 Bluetooth GPS Receiver is a total solution GPS receiver, designed based on SiRF
Star III SOC single chip architecture. It provides you unbelievable sensitivity and wireless transmitting ability.
This positioning application meets strict needs such as car navigation, mapping, surveying, security, agriculture
and so on. Only clear view of sky and certain power supply are necessary to the unit. It communicates with
other electronic utilities via compatible dual-channel through RS-232 or TTL and saves critical satellite data by
built–in backup memory. With low power consumption, the GPS-6036 tracks up to 12 satellites at a time,
re-acquires satellite signals in 100 ms and updates position data every second. Trickle-Power (optional function)
allows the unit operates a fraction of the time and Push-to-Fix (optional function) permits user to have a quick
position fix even though the receiver usually stays off.
1.2 Features
The GPS-6036 provides a host of features that make it easy for integration and use.
1) Fast acquisition: 20 parallel satellites acquisition
2) Advanced GPS chip: SiRF Star III SOC
3) Fast TTFF: 200,000 effective correlators for fast TTFF at low signal levels
4) Built-in WAAS/EGNOS (Optional model for WAAS/EGNOS covered area) and DGPS for accurate
positioning result.
5) Quick Host start: Built-in rechargeable Lithium battery for backup ephemeris for quick hot start.
6) Support MNEA 0183V2.2 data protocol.
7) Enhanced algorithms provide superior navigation performance in urban, canyon and foliage
Environments.
8) User initialization is not required.
9) LED display status: The LED provides users visible positioning status. LED “BLINKING” when power
connected and stays “ON” when GPS-6036 position identified. No more extra device needed.
10) Built-in Magnets for using on top of the car.
11) Updated Bluetooth profile V2.0
1.3 Technology specifications
1.3.1 Physical Dimension
1) Bluetooth GPS unit
Size: 77.7(W) x 41.0(D) x 13.7(H) (mm)
3.06"(W) x 1.61"(D) x 0.54"(H).
Weight: 50g
2) Cradle unit
Size: 56.0(W) x 47.0(D) x 31.2(H) (mm)
2.20"(W) x 1.85"(D) x 1.23"(H).
Weight: 25g
1.3.2 Environmental Characteristics
1) Operating temperature: -20
o
C to +85
o
C(internal temperature).
2) Storage temperature: -55
o
C to +100
o
C.
1.3.3 Electrical Characteristics
1) Input voltage: + 5.5 ± 0.5VDC.
2) Backup power: 3V Rechargeable Lithium cell battery, up to 230 hours (9.5 days) discharge.