Filter
Top Products
6
components. Riders with longer hair may risk entanglement in the rear
wheels or drive system. Do not allow long hair to get near the wheels or
drive system.
5. Safety Check (before each ride)
5A. Loose parts. While straddling the Electric Scream Machine, lift the
front wheel off the ground two or three inches and let go so it can
bounce on the ground. Does everything sound tight? There should not
be any unusual rattles or sounds from loose parts or broken
components. If you are not sure, ask an experienced mechanic to
check.
5B. Brake. Check the brake for proper function. When you pull the lever
the brake should act against the rim and provide positive braking action.
The cable should have the proper slack so the brakes do not drag, yet
the lever should not touch the handlebars when pulled except under the
hardest braking action.
5C. Frame, fork and handlebars. Check for cracks or broken
connections. Although broken frames are unlikely and rare, it is possible
for an aggressive rider to bash into a curb or wall and wreck and bend
or break a frame, fork or handlebar. Get in the habit of inspecting yours
regularly.
5D. Bar ends. Your Razor is equipped with plugs in the end of the
handlebars designed to provide protection from exposed handlebar
ends, which can act like a cookie-cutter. If your bar plugs are worn out
or missing and the handlebar end is exposed, replace them or cover the
exposed end(s) with after-market bar-end protectors.
5F. Tire inflation. The front tire on the Electric Scream Machine
requires 35~45 psi inflation pressure. Periodically and regularly check
the tire pressure and reinflate as necessary. If you get a flat tire the
inner tube is available at any retailer that sells bicycle parts and
accessories. The correct size is embossed on the side of the tire (16 x
1.75).
NOTE: For safety reasons, the Electric Scream Machine must be
moving at least 3mph before the motor will start. Pedal or push to
3mph, then pull the trigger to start the motor!
6. Assembly
NOTE: The color of the product in certain photos may appear to