Filter
Top Products
Chapter 5: Digital Selective Calling (DSC) 35
3. Rotate the CH knob until the arrow points to the desired individual name.
If using MANUAL MMSI ID entry:
Enter the MMSI number using the CH knob. Rotate the CH knob to select
each character and then push in the CH knob to accept. The next position
to be modified is indicated by a blinking underline. A full description of
manual character entry can be found in Adding an Entr
y on page 59.
4. Push in the CH knob to select the desired individual name/MMSI ID.
5. Rotate the CH knob to select the working channel to be used for the Indi-
vidual Call.
Note: Individual Calls to a Coast Station remove this step from the oper-
ating procedures. The Coast Station controls and indicates the subse-
quent working channel within its acknowledgement.