Filter
Top Products
9
WINDSHIELD MOUNTING
The supplied suction-cup windshield bracket lets you easily
mount the detector on the windshield.
Caution:
Do not use the bracket in a vehicle that has a plastic
coating on the windshield designed to protect passengers dur-
ing an accident. If you use the bracket on this type of wind-
shield, you might permanently mar the windshield’s surface.
1. Align the groove in each suction cup with the slots in the
windshield bracket and slide the suction cups out until they
lock into place.
2. Press the supplied black rubber windshield mount stop into
the small hole on the windshield bracket.
Note:
You might need to slightly twist the stop to get it to
pop into the hole.
3. Clean the selected windshield area, position the bracket on
the windshield, and press firmly on each suction cup to
secure it in place.
4. Slide the radar detector onto the base plate until it snaps
into place.
22-1667.fm Page 9 Friday, August 6, 1999 10:07 AM