Filter
Top Products
12
ADJUSTING THE VOLUME
The detector has four volume levels. To change the detector’s
volume, press and hold down
P
•
V
. The detector sounds tones
at the current volume level. When the detector reaches full vol-
ume, the fourth ALERT indicator turns on. When the detector
reaches minimum volume, the first ALERT indicator turns on.
Note:
When the detector reaches either the maximum or mini-
mum volume, you must release and press
P
•
V
again to
reverse the volume direction.
DEMONSTRATING ALERTS
To familiarize yourself with the different alerts your detector
produces, you can run a demonstration. To start the demon-
stration, press and release
MUTE
and
CITY
at the same time
with the detector turned on. The detector demonstrates the
alerts for X, K, Ka, safety warning, laser, and VG-2, in that
order. To end the demonstration, press
P
•
V
.
MUTING ALERTS
While a radar, laser, or safety warning alert is sounding, you
can press
MUTE
to temporarily silence the detector for the cur-
rent alert and any new alert that is produced within 10 sec-
onds. Visual alerts are not affected.
22-1667.fm Page 12 Friday, August 6, 1999 10:07 AM