Filter
Top Products
10
5. To level the detector, press the bracket release button to
remove the bracket from the detector. Then bend the
bracket.
CONNECTING POWER
Caution:
• Unplug the power cord’s cigarette-lighter plug from your
vehicle’s cigarette-lighter socket when you turn off the igni-
tion. This prevents your vehicle’s battery from being drained
if you leave the detector on when you turn off the ignition.
• Before plugging the power cord’s cigarette-lighter plug into
your vehicle’s cigarette-lighter socket, make sure the plug’s
tip is screwed firmly onto the plug. See “Replacing the
Fuse” on Page 18 for more information about the cigarette-
lighter plug.
• Use only the supplied power cord. If your power cord is lost
or damaged, you can order a replacement cord from your
local RadioShack store.
Plug the supplied power cord’s short barrel plug into the detec-
tor’s power jack. Then plug the cord’s cigarette-lighter plug
into your vehicle’s cigarette-lighter socket.
Note:
If the detector does not operate when you turn it on,
remove the cigarette-lighter plug from your vehicle’s socket
and check the socket for debris. Also check the fuse in the cig-
arette-lighter plug and your vehicle’s fuse block (see “Replac-
ing the Fuse” on Page 18).
22-1667.fm Page 10 Friday, August 6, 1999 10:07 AM