Filter
Top Products
15
Some emergency services, such as ambulances, fire trucks,
police, and road crews, are equipped with a special transmitter
that can alert you to their presence.
When your detector senses a safety warning system signal, it
beeps a tone and lights the first and fourth ALERT indicators.
The audible alert beeps faster as the signal strength
increases.
Note: Your detector does not detect X, K, Ka, or safety warn-
ing signals when it is sensing a VG-2 radar-detector detector.
RESETTING THE DETECTOR
The detector keeps the audio level, city mode, VG-2 option,
and power state (on or off) in memory when power is removed.
When you reapply power, it returns to these same settings.
To reset the detector to its factory default settings, unplug the
detector’s power cord from the cigarette-lighter socket, press
and hold
P
•
V
and
MUTE
, plug in the power cord, wait for two
beeps, then release
P
•
V
and
MUTE
. The detector turns off the
VG-2 option, returns to highway mode, and sets the volume to
its default level.
22-1667.fm Page 15 Friday, August 6, 1999 10:07 AM