Filter
Top Products
18
Notes:
• Messages are numbered from 1 to 64, but 6 mes-
sages are not currently used.
• You must turn on Safety Warning System detection
and Safety Warning System transmitters must be in
use to receive Safety Warning System alerts. See
“Turning On Safety Warning System and VG-2
Detection” on Page 15.
DEMONSTRATING FEATURES
To demonstrate alerts, with the detector off, hold down
AUD
and
CTY
. The detector displays
TUTORIAL
, then
demonstrates all audio alerts and displays the corre-
sponding band. It then demonstrates the signal strength
meter, a VG-2 alert, and three sample SWS messages.
To end the tutorial, press
P/V
.
To see all 58 SWS messages, press
CTY
during a sam-
ple
SWS
message. The detector displays
MSG
and the
current message number. To see this message, press
AUD
. To advance to the next message, press
CTY
. If you
do not press a button within 3 seconds, the detector
resumes its demonstration.
RESETTING THE DETECTOR
To reset the detector to its defaults, with the detector
off, hold down
AUD
, then press both
CTY
and
P/V
. The
detector displays
RESET
and beeps twice.
22-1670.fm Page 18 Friday, August 6, 1999 10:17 AM