Filter
Top Products
12
CONNECTING POWER
Caution:
Unplug the power cord’s cigarette-lighter plug
from your vehicle’s cigarette-lighter socket when you
turn off the ignition. This prevents your vehicle’s battery
from being drained if you leave the detector on when
you turn off the ignition.
Plug the supplied power cord’s short barrel plug into the
detector’s power jack and the longer barrel plug into the
cigarette-lighter plug. Then plug the cord’s cigarette-
lighter plug into your vehicle’s cigarette-lighter socket.
Note:
If the detector does not operate when you turn it
on, remove the cigarette-lighter plug from your vehicle’s
socket and check the socket for debris. Also check the
fuse in the cigarette-lighter plug and your vehicle’s fuse
block (see “Replacing the Fuse” on Page 21).
22-1670.fm Page 12 Friday, August 6, 1999 10:17 AM