Filter
Top Products
15
AUDIO MODES
While the detector is sounding a radar or Safety Warn-
ing System alert, you can press
AUD
to temporarily
silence it. The detector returns to normal operation after
the radar signal stops.
You can change the alert pattern to sound several X-,
K-, or Ka-tones followed by muted clicking by pressing
AUD
when no alert is sounding. The detector briefly dis-
plays
AUTOMUTE
. The clicking becomes more rapid as
the radar signal strength increases. Press
AUD
again to
return to normal operation. The detector briefly displays
AUTO
off
.
Note:
Laser alerts are not affected by the audio modes.
TURNING ON SAFETY WARNING
SYSTEM AND VG-2 DETECTION
You can turn the Safety Warning System and VG-2
detection on and off to suit your needs. Follow these
steps to change these features.
1. With the detector off, press and hold
CTY
, then
press
P/V
. The detector beeps and briefly displays
FEATURES
. Then the detector either displays
SWS
on
or flashes
SWS
off
.
2. Press
AUD
to change the SWS setting.
22-1670.fm Page 15 Friday, August 6, 1999 10:17 AM