Filter
Top Products
© 2008 Directed Electronics—all rights reserved
38
Owner recognition
Owner Recognition lets up to four users of the system have unique
settings that meet their specific needs. It is almost like having four
separate alarms in your vehicle, one for each user. This feature is
only available to authorized dealers using the Bitwriter or Bitwriter 2
program tool.
Rapid resume logic
This Directed system will store its current state to non-volatile
memory. If power is lost and then reconnected the system will recall
the stored state from memory.
For example, if the unit is in Valet Mode and the battery is discon-
nected for any reason, such as servicing the car, when the battery is
reconnected the unit will still be in Valet Mode. This applies to all
states of the system including arm, disarm, and Valet Mode.
Power saver mode
System
Your system will automatically enter Power Saver Mode while armed or
in Valet Mode, after a period of time in which no operation has been
performed. This lowers the current draw on the vehicle’s battery. Power
Saver Mode takes over under the following conditions:
Power Saver when the system is armed: After the system has been
armed for 24 hours the LED will flash at half its normal rate, decreasing
the system’s current draw.