Filter
Top Products
© 2008 Directed Electronics—all rights reserved
9
Feature Command Confirmation
Feedback
Notes
Armed
(Silent
Trigger
mode)
Press four-
times and then .
Lock LED on, 1
beep & 4 error
tone
Arms the system; sensor and
hardwire Full Triggers will ONLY
page the remote and will not
activate the siren/lights. For
more details see Silent Mode 2
section on page 25.
Rear
Defogger
Press four
times, and then
. (Only after
remote start is
on.)
Remote start
LED ON, 1
beep.
Automatically turns on during
remote start.
Last Trigger
Press four-
times and then
hold for 1.5
seconds.
Replays the
last trigger
message
received.
Trigger refers to the remote
tones and LED pattern gener-
ated by the last alarm trigger
event.
Out of Range Notification
If a command is issued from the remote, but the remote is beyond the
range of the vehicle to receive the command, the remote will respond
with an Out of Range notification. If this occurs, the remote will Blink
rapidly the transmit indicator, turn on the F indicator and play the
error tone.
Since conditions will vary in different areas (ie: Weather, RF interfer-
ence, etc) range may be affected and require you to be closer to the
vehicle for successful transmission.