Filter
Top Products
© 2008 Directed Electronics—all rights reserved
6
Feature Command Confirmation
Feedback
Notes
Silent Arm
Press one- time
and then press .
Arm/Lock LED
on, no audio
Arms the system without
chirps
Silent Disarm
Press one- time
and then press
1
3
4
5
6
2
A U
X
.
Disarm/Lock
LED on, no
audio
Disarms the system without
chirps
Runtime
reset
Press one-time
and then .
Remote start
ON tones.
Re-starts the remote start
runtime counter if remote start
is active. Note: If remote
start is not active, the 2-WAY
remote will respond with error
tone.
Aux 1
Press one time
and then press
A U
X
.
The AUX LED
comes on
for 3 seconds,
and AUX
activation tone
sounds.
This is an optional
feature. See your sales rep/in-
staller for details.
Cabin
temperature
Press one time,
then Hold for 1.5
seconds.
Multiple LEDs
blink, and 1
beep
Cabin temperature is displayed
on the remote. LED lights
up to indicate a range. (See
page 30.)
Sensor
Bypass
Press two-
times and then .
Arm/Lock LED
on, 1 beep
Available when armed only:
bypasses warn triggers. Send
again to bypass Warn & Full
Trigger; Send again to turn
bypass off and monitor sensors
normally. For more informa-
tion, see Modified Arming
Modes on page 24