Filter
Top Products
8580/8590 Vehicle-Mount Computer User Manual E-15
Appendix E: BIOS
Remote Access Configuration Sub-Menu
E.5.10 Remote Access Configuration Sub-Menu
Feature Options Description
Remote Access
Disabled
Enabled
Enable/Disable the BIOS remote access feature.
Note: If the systems serial ports are disabled in
the 'I/O Interface configuration' submenu, then
serial redirection is disabled and 'Remote access
configuration' menu is unavailable to the users.
Serial Port
Number
COM1
COM2
Select the serial port you want to use for console
redirection.
Note: Only enabled serial ports are presented as
an option.
Serial Port Mode
115200 8,n,1
57600 8,n,1
19200 8,n,1
Select the baud rate (transmitted bits per second)
you want the serial port to use for console redi-
rection.
Note: The terminal program used with serial
redirection must be set to use exact the same set
of communication parameters.
Flow Control
None
Hardware
Software
Select the flow control for serial redirection.
Redirection After
BIOS POST
Disabled
Boot Loader
Always
With Disabled, serial redirection functionality is
disabled at the end of BIOS POST.
If set to Always, all resources and interrupts
associated with serial redirection are protected.
This option lets serial redirection permanently
reside at base memory which allows the console
to be redirected.
If set to Boot loader, serial redirection is active
during the OS boot loader process. This allows
boot status messages to be redirected, but serial
redirection will terminate when the OS loads.
Terminal Type
ANSI
VT100
VT-UTF8
Select the target terminal type.
Escape sequences representing keystrokes are
sent to the remote terminal based on these set-
tings.