Filter
Top Products
8580/8590 Vehicle-Mount Computer User Manual D-1
APPENDIX D
MECHANICAL D YNAMIC L OADING
D.1 Introduction
The mechanical environmental conditions of the 8580/8590 can vary greatly in
terms of vibrations, collisions and shocks. The matter is made more difficult by the
fact that the random values for acceleration and their frequencies for a given
location are often unknown.
It is therefore useful to divide the values into three operation classes 5M3, 5M2 and
5M1 on the basis of standards, previous measurements and experience. The
following standards offer a practical means of reference:
• DIN EN 60721-3-5: 1998 classification of environmental conditions, part 3,
section 5: Use on and in ground vehicles.
• Military standard MIL-STD 810F: 2000.
(5)M3 Mobile Use
Operational environments with high energy vibrations and high energy shocks as
well as rough handling/transport compliant with:
• Operation class 5M3 according to DIN EN 60721-3-5 or equivalent.
• Category US Highway Truck according to MIL-STD 810F.
• Examples: Vehicles without shock absorption: Fork lifts, unbalanced
machines: Combustion engine of a construction machine.
(5)M2 Restricted Mobile Application
Operational environments with low energy vibrations and high energy shocks as
well as careful handling/transport compliant with:
• Operation class 5M2 according to DIN EN 60721-3-5 or equivalent.
• Category US Highway Truck according to MIL-STD 810F.
• Examples: Vehicles with shock absorption: Driver's cab in a tractor, stand-
ing machines: Machine tools.