Filter
Top Products
30
Maxima
www.pridemobility.com
VII. DISASSEMBLY AND ASSEMBLY
NOTE: There is no need to disconnect the motor harness when disassembling the scooter. See figure 20.
7. Lift both batteries off the scooter. See figure 21.
8. Push the locking cam levers forward to the unlocked position and remove the ball detent pins. See
figures 22 and 23.
9. Remove the frame handle ball detent pin. See figure 24.
10. Gently slide the two sections of the scooter apart. See figure 25.
11. Grab the hand grip on the tiller, pull upward on the tiller adjustment lever, and fully lower the tiller
down to the center of the scooter chassis.
Figure 20. Motor Harness
Figure 21. Battery Removal
MOTOR HARNESS
Figure 25. Frame Separation
Figure 24. Frame Handle Ball Detent Pin
Figure 22. Locking Cam Levers (Unlocked Position)
Figure 23. Frame Lock-up Ball Detent Pins